Available in: With/Without RF & Voice

FTTH ONT SingleBand XponGpon Ont 1Ge+2Fe 2.4G Wifi


  • Plug and play, auto configuration, and auto firmware upgrade technology.
  • Full compliance to IEEE 802.3ah specification & OAM function
  • Support 802.11n 2T2R speed up to 300Mbps
  • Support No-auth, WEP, WPA-PSK and WPA2-PSK function with AES, TKIP encryption.
  • Support Console/ Telnet/ NMS management interface for ease of operation and maintenance
  • The WAN port supports bridge / router mode. Fully compatibility with all OLT available in indian market.
  • Full speed non-blocking switching. 2K MAC address table.
  • 64 full range VLAN ID
  • Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc
  • Integrated port monitoring, port mirroring, port rate limiting, port g
  • Support auto polarity detection of Ethernet ports (AUTO MDIX). Integrated IEEE802.1p
  • QoS with four level priority queues.
  • Support IPv4 IGMP snooping and IPv6 MLD snooping.
  • Support bridge, router and bridge/router mixed mode.

Product Construction

ms Unit Specifications
PON standard. EPON IEEE802.3ah, GPON ITU-T G.984.x
Optical interface SC/PC connector, 1 GPON/EPON interface(EPON PX20+ and GPON Class B+)
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0 ~ +5dBm
Transmission distance: 20KM
Speed Gbps GPON: uplink 1.25Gbps, downlink 2.5Gbps; EPON: symmetric 1.25Gbps
Wavelength nm Tx1310, Rx 1490
Interface data 1GE 10/100/1000Mbps Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connectors
Operating condition Operating temperature: -5 ~ +55
Storing condition Storing temperature: -30 ~ +60
Humidity % 10~90(non-condensing)
Power supply V DC 12V,0.5A adapter
Power consumption W ≤4
Dimension mm 90×82×23(L×W×H)
Net weight Kg 0.1